...
Silhouette CAMEO 4 – Cutting plotter

Silhouette CAMEO 4 – Cutting plotter Leave a comment

We present you a new series of cutting plotters Silhouette CAMEO 4 from Silhouette America (USA).
The new series of cutting plotters is represented by three models:

  • Silhouette CAMEO 4 Pro – Cutting width 305 mm.
  • Silhouette CAMEO 4 Pro – Cutting width 371 mm.
  • Silhouette CAMEO 4 Pro – Cutting width 610 mm.

Silhouette CAMEO 4 series cutting plotters are capable of cutting using optical mark, drawing and through-cutting of materials up to 3mm thick. The two-tool holder on the plotter carriage allows you to perform two operations in one pass, such as drawing and cutting.

Silhouette CAMEO 4 cutting plotters are the best choice for the production of promotional and
printed products, as well as for the development of creative abilities in children: Crafting and
Scrapbooking.

Silhouette CAMEO 4 is more than just a cutting plotter, it’s a hobby machine (DIY machine) or a tool
to fulfil your creative ambitions. (DIY – Do it yourself)

The main innovations and features of the new Silhouette CAMEO 4 series of cutting plotters, as well
as what makes them different from other Silhouette plotters, are described below.

Cutting plotters of Silhouette CAMEO 4 Series

The main features of the new series of plotters:

  • The pressure on the knife is increased to 5 kg.
  • The increased clearance and pressure on the knife allows you to cut various materials up to 3mm
    thick.
  • The two tool holder on the cutter carriage allows you to perform two different operations in one
    pass.
  • Cutting speed has been increased to 300 mm per second. Silhouette Cameo 4 has three times the
    acceleration and cutting speed of the Silhouette Cameo 3.
  • New LED display with illuminated buttons.
  • Silhouette Cameo 4 can cut through a variety of materials with or without a carrier sheet.
  • Silhouette Cameo 4 supports new knives and tools:
  • The cutting plotter is supplied with a set of plastic adapters of different colours for it to work with
    knives from other models of plotters.
  • Silhouette Cameo 4 automatically detects the type of tool installed in the cutter carriage.
    Improved mechanism for pressing the material and setting the position of the pressure rollers.
  • The built-in feeder of materials from a roll, Roll feeder.
  • The built-in knife for cutting along the material after cutting.
  • Increased side compartment for storing knives and tools.
  • The top cover of the plotter can be removed to make for more comfortable operation.
  • High-precision microstepping motors are installed in the mechanics of the cutting plotter.
  • You can choose the convenient way to connect your cutting plotter to your computer: wired USB 2.0
    or wireless Bluetooth.
  • Built-in optical sensor for contour cutting on labels or stickers.
Two tool holder on the cutter’s carriage
Two tool holder on the cutter’s carriage

You can fit two different tools or knives in the Silhouette Cameo 4 cutter carriage at the same time.
The two tool holder on the cutter carriage will allow you to perform two operations in one pass,
such as:
Drawing with a pen or felt pen on paper or cardboard, and then cut through.
Cut self-adhesive or thermal transfer film with a regular AutoBlade cutter and apply auxiliary
markings on the areas to be punched using the Punch Tool.
Make coarse cuts on kraft leather, felt or foamiran with a Rotary Blade, and then make more precise
cutting with a Kraft Blade or AutoBlade, etc.

High pressure on the knife, 5 kg.
High pressure on the knife, 5 kg.

Silhouette Cameo 4 cutting plotter’scarriage has a more powerful motor, that allowed to increase
the knife pressure to 5000 g or 5 kg.

There are two tool positions on the cutter carriage: Tool Holder 1 and Tool Holder 2.

On the first tool holder, the knife pressure is 210 g, which allows for standard cutting of various
materials.

On the second tool holder, the knife pressure is 5 kg. By setting the special tool to position 2 on the
plotter carriage, you will be able to cut thick materials that require more pressure on the knife.

Automatic tool type detection function
Silhouette CAMEO 4 cutting plotter Function Auto Blade Detection

The Auto Blade Detection feature allows the Silhouette Cameo 4 cutting plotter and Silhouette
Studio software to detect the type of blade or tool installed in the cutter carriage automatically.

New knives and tools are equipped with a non-contact chip (rectangular strip) that allows the plotter
to detect the type of tool in the plotter carriage and then send this data to the Silhouette Studio
software. This feature eliminates operator error when setting cutting modes in the software and
makes it easy working with the Silhouette Cameo 4 cutting plotter.

Please note that the contactless chip is also installed on 4 plastic adapters, where you can install old
knives, and the plotter will automatically detect their type.

New control panel
New LED display with illuminated buttons

The Silhouette Cameo 4 cutting plotter has a new control panel in the form of an LED display with
illuminated buttons.

Using the buttons on the control panel, you can load or unload material, move the plotter carriage
into the desired position, or enable Bluetooth wireless communication.

Built-in roll feeder and trimming knife

The Roll feeder built into the Silhouette Cameo 4 cutting plotter allows you work with rolled
materials.

The built-in lengthwise cutting knife allows you to trim the material after cutting. To cut the
material, you need to unlock the knife and slide it smoothly along the back of the plotter, along the
guide. The trimming knife is shaped like a cartridge that can be easily removed or replaced.

Built-in roll feeder and cutting knife
Built-in roll feeder and cutting knife
Side compartment for storing knives and tools
Silhouette CAMEO 4 cutting plotter Side compartment for storing knives and tools

On the left side of the plotter there is a storage compartment for knives and tools. The top cover of
the plotter can be removed for ease of use.

Convenient rollers for setting the width of the material
Convenient rollers for setting the width of the material
Convenient rollers for setting the width of the material
New knives and tools

Cutting plotter Silhouette Cameo 4 supports new knives and tools:

  • Knife for cutting thick materials Kraft Blade 3 mm;
  • Rotary Blade for cutting materials such as fabric, leather, felt, wool, etc. The roller cutter uses a
  • special tangential cutting mode that allows you to cut fabric without the presence of a self-adhesive
  • backing or stabilizer (fixing the fabric on the backing).
  • New generation automatic knife AutoBlade 2 with automatic ejection setting. For this tool, the
  • desired knife ejection setting is set just in one click.
  • Auxiliary perforating tool Punch Tool to facilitate the selection of films.

New blades and tools are not compatible with older Silhouette cutting plotters.

Optical sensor for contour cutting using marks

The built-in optical sensor in the Silhouette Cameo 4 cutting plotter will allow you to contour cut on
marks of self-adhesive labels or stickers, or other products printed on design paper or cardboard.

Attention: The optical sensor in the Silhouette Cameo 4 and Portrait 3 series cutting plotters may not
be able to read the registration marks when working with glossy materials. Glossy materials reflect
light and “dazzle” the optical sensor. We recommend sticking squares of transparent matte film onto
the marks on the material to solve this problem. Graphtec CE7000 series professional cutting
plotters have a special mode for reading registration marks on glossy materials.

Built-in wireless Bluetooth interface
Built-in wireless Bluetooth interface

Convenient method of connecting your plotter to computer You can choose the convenient way
to connect your Silhouette Cameo 4 cutting plotter to your computer: wired USB 2.0 or wireless
Bluetooth.

Plastic adapters for old knives
Plastic adapters for old knives
Black adapter

The cutting plotter is supplied with a set of plastic adapters in different colours Tool Adapter Set.
Adapters allow Cameo 4 to mount knives and tools from previous Silhouette cutters: Cameo 1, 2, 3
and Portrait.

The black adapter fits the following knives: SILH-BLADE-3-3T standard knife and SILH-BLADE-FAB-3
textile knife.
Gray adapter: SILH-BLADE-DEEP deep cutting blade and SILH-BLADE-PREM premium blade;
White adapter: craft knife for cutting materials up to 2 mm thick SILH-BLADE-KRAFT;
Blue adapter: PEN-HOLDER2-3T pen holder, felt pens Sketch Pens and other 3rd Party Tools.
Each plastic adapter has number 1 on it. The user can only install the adapter in the tool holder
number 1 on the plotter carriage on the left.

Areas of use:
  • Cutting of self-adhesive vinyl film for the outdoor and indoor advertising production.
  • Home and office interior design.
  • Interior design of kindergartens, preschool institutions, schools, universities and gymnasiums.
  • Decoration of festive events.
  • Application of cutting plotters for general educational purposes for the development of children and
  • schoolchildren: drawing and technical schemes, cutting out various letters and figures, creating 3D
  • models of objects and models of toys.
  • Production of greeting cards, invitations, mini-packages, souvenirs, promotional boxes, toys, etc.
  • Application of cutting plotters to develop creativity in children and parents. Hobby. Crafting and
  • scrapbooking.
  • Cutting out of fabric patterns, inscriptions and figures for decorating textiles and clothing, as well as
  • for embroidery.
  • Cutting of thermal transfer films (flex, flock) for transferring patterns and logos to textiles.
  • Cutting films for transferring thermos rhinestones to textiles.
  • Cutting of self-adhesive films for decoration of inflatable balls.
  • Production of self-adhesive labels, stickers and stickers in printing and advertising industry.
  • Production of destructible warranty labels, labels for wine bottles, etc.
  • Cutting labels and stickers along the contour printed by offset, silk-screen, inkjet or laser method on
  • self-adhesive paper or film.
  • Production of volumetric labels filled with resin.
  • Production of various templates and stencils.
  • Cutting films for sandblasting.
  • Production of promotional fridge magnets.
  • Creation of templates for drawing patterns on glass using the glass matting method.
  • Production of advertising stands, signboards, signs and information plates, etc.

See details of various applications of cutting plotters

Silhouette Studio Software
Silhouette Studio software

The Silhouette Studio software for working with the Silhouette CAMEO 4
cutting plotter can be downloaded from the manufacturer’s website.

Silhouette Studio software allows you to create cutting layouts, place optical marks for contour
cutting on marks, output layouts to printers, and send cutting jobs directly to the cutter.

Silhouette Studio key features:
  • Creating layouts for cutting (creating a design, working with fonts, etc.).
    Import of files in vector and raster formats:vector format AutoCAD DXF;
  • raster formats: TIFF, JPEG, BMP, PNG, GIF, etc.
  • Output of layouts to printing devices (inkjet or laser printers).
  • Arrangement of optical marks for contour cutting using marks feature.
  • Sending layouts for cutting to a cutting plotter, etc.
Silhouette Studio software and plotter
Silhouette CAMEO 4 and Silhouette Studio Software

The basic free version of Silhouette Studio (Basic Edition) does not allow you to import CDR and AI
vector files (CorelDRAW and Adobe Illustrator) into the program. You can save vector files created in
CorelDRAW and Adobe Illustrator in DXF format and then import them into Silhouette Studio.

The Silhouette Studio software supports PRINT & CUT mode using optical marks. You can first print
the image on paper or self-adhesive film by any printing method (offset or silk screen printing, digital
laser or inkjet printing), and then cut out the printed image following the contour.

Contents of delivery:

What’s in the box Silhouette CAMEO 4

Silhouette Cameo 4 package
  • Power supply and power cord: 1 pc.
  • USB cable: 1 pc.
  • Cutting knife: auto knife AutoBlade2 – 1 pc. (SILH-BLADE-AUTO-2).
  • Career sheet format 30.5 x 30.5 cm: 1 pc.
  • Built-in knife for lengthwise trimming of material Crosscutter.
  • Built-in feeder of materials from a roll, Roll feeder.
  • A set of plastic adapters (4 pcs.) in different colors Tool Adapter Set. The adapter allows you to
  • install the following tools on Cameo 4: SILH-BLADE-3-3T, SILH-BLADE-FAB-3, SILH-BLADE-PREM, SILH-
  • BLADE-DEEP.

The basic version of the Silhouette Studio software (Basic Edition) (Windows 7 -10 and
Macintosh 10.7 and higher) for working with the cutting plotter can be downloaded from themanufacturer’s website (see the link below).

Specifications:
  • Model: Silhouette Cameo 4 cutter.
  • Article: SILH-CAMEO-4-WHT-5T.
  • Maximum cutting area: 305 mm x 3 meters.
  • Material width: up to 330 mm.
    Knife pressure:
  • 210 g on the first tool holder (Tool Holder 1);
  • 5000 g (5 kg) on the second tool holder (Tool Holder 2).
  • Maximum thickness of material for cutting: up to 3 mm.
  • Types of cut material: self-adhesive film, paper, cardboard, photo paper, thermal transfer films,
    foam cardboard, foamiran, textile materials, fabric, felt, kraft leather and other materials up to 3
    mm thick.
  • Through cutting of materials with or without a carrier sheet.
  • Optical sensor for contour cutting using marks: yes.
  • Number of tools on the carriage: 2.
  • The two-tool holder on the plotter carriage allows you to perform two operations in one pass, such as drawing and cutting.
  • Maximum cutting speed: 300 mm/sec.
  • Interface: USB 2.0 and Bluetooth.
  • Display: LED display with illuminated buttons.
  • Motors: High precision motors with micro steps.
  • Power supply: power supply block 100-240 V, 50/60 Hz.
  • OS: Windows 7-10, Macintosh 9.5 and above.
  • Operating conditions: temperature 5 – 32 degrees C, 35-75% humidity.
  • Dimensions (width, depth, height): 570 x 195 x 170 mm.
  • Weight: 4.7 kg.
  • Manufacturer: Silhouette America (USA) and Graphtec (Japan).
  • Warranty: 1 year.

Leave a Reply

Your email address will not be published. Required fields are marked *

Seraphinite AcceleratorBannerText_Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.